Ejecutando TestDisk

From CGSecurity
Jump to: navigation, search

En.png English De.png Deutsch Es.png Español Fr.png Français It.png Italiano


Inicio de TestDisk

Cuando TestDisk es ejecutado, puede ver la frase Please wait... en su pantalla hasta que se han juntado datos suficientes del BIOS ó el SO para obtener la lista de discos rígidos.

TestDisk 6.10-WIP, Data Recovery Utility, February 2008
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org


TestDisk is a free data recovery software designed to help recover lost
partitions and/or make non-booting disks bootable again when these symptoms
are caused by faulty software, certain types of viruses or human error.
It can also be used to repair some filesystem errors.

Information gathered during TestDisk use can be recorded for later
review. If you choose to create the text file, testdisk.log , it
will contain TestDisk options, technical information and various
outputs; including any folder/file names TestDisk was used to find and
list onscreen.

Use arrow keys to select, then press Enter key:
[ Create ]  Create a new log file
[ Append ]  Append information to log file
[ No Log ]  Don't record anything
TestDisk 6.10-WIP, Data Recovery Utility, February 2008
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

  TestDisk is free software, and
comes with ABSOLUTELY NO WARRANTY.

Select a media (use Arrow keys, then press Enter):
Disk /dev/sda - 120 GB / 111 GiB - ATA ST3120026AS
Disk /dev/sdb - 120 GB / 111 GiB - ATA ST3120026AS








[Proceed ]  [  Quit  ]

Note: Disk capacity must be correctly detected for a successful recovery.
If a disk listed above has incorrect size, check HD jumper settings, BIOS
detection, and install the latest OS patches and disk drivers.

Si el tamaño reportado no es igual al tamaño del disco, ejemplo, un disco de 120 GB es reconocido como solamente uno de 32 GB, revise los seteos del BIOS de su disco y los jumpers en el disco. En la mayoría de los discos grandes, hay jumpers que limitan el tamaño a sólo 32 u 8 GB. Si su HD es detectado como de 130 GB solamente, puede no estar disponible el soporte para LBA48 en su sistema operativo, lea Notas de SO para más información.

El próximo paso es seleccionar el tipo de tabla de partición


TestDisk 6.10-WIP, Data Recovery Utility, February 2008
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org


Disk /dev/sda - 120 GB / 111 GiB - ATA ST3120026AS

Please select the partition table type, press Enter when done.
[Intel  ]  Intel/PC partition
[EFI GPT]  EFI GPT partition map (Mac i386, some x86_64...)
[Mac    ]  Apple partition map
[None   ]  Non partitioned media
[Sun    ]  Sun Solaris partition
[XBox   ]  XBox partition
[Return ]  Return to disk selection





Note: Do NOT select 'None' for media with only a single partition. It's very
rare for a drive to be 'Non-partitioned'.

Items de Menú de TestDisk

Volver a la página principal de TestDisk (Castellano)